The Zamp solar input port on the passenger side of the Travato is used to connect a portable solar panel. Several panel sets are made by Zamp that can be used directly, and it is straightforward to adapt other panels to connect to this port.
Requirements for connecting here are:
- The wiring from this port is rated for 150W of solar panel(s)
- The portable panel should not have a regulator. The port is wired to the input side of the on-board Zamp controller, the same as the roof panel junction box.
IMPORTANT: Before connecting any equipment other than that made by Zamp, it is STRONGLY suggested that you contact Zamp Solar customer support to make sure that the wiring is compatible. If it isn’t they will suggest what changes you need to make.
Portable panels typically have legs to stand up at an angle so they can be aimed at the sun. If you’re camped where you can do so, re-angling the panels every few hours is worthwhile.